Menu Home

How to clean black tapware

Take a peek at some of the most popular home decor Instagram accounts and you’re certain to find black bathroom faucets and tapware.

Over the past year or two, black tapware has rocketed to the top of fashionable bathroom ‘must haves’ – people can’t get enough of their stunning matt black deliciousness!

However, what good is a trendsetting bathroom – adored by millions of social media followers – if you can’t keep your new matt black taps and fittings clean?

Of course, you may continue as normal, but unlike ‘standard’ bath and basin tapware with metallic surfaces, matt black requires a more careful and deliberate approach to cleaning. Click here to read more about tapware Australia.

One incorrect move with a strong chemical cleaner may be the end of that flawless matt black surface – and with it, the end of your lovely bathroom area!

Therefore, to avoid catastrophe, continue reading to discover how to clean black bathroom taps and maintain the trendy dark noir appearance you’ve been dreaming of!

Why Are Black Taps Difficult to Clean?

A close-up of a person's hand holding a syringe

As you may have guessed from their appearance, matt black tapware have a distinct finish than conventional bathroom tapware designs – and we don’t just mean in terms of color!

Unlike chrome taps, matt black taps are intended to provide a ‘complete’ black appearance by absorbing light rather than reflecting it, resulting in the matt black surface.

Due to the procedures used to achieve the sleek matt surface on your black taps, they are somewhat more sensitive than standard brassware, so selecting the first cleaner you see is not necessarily the greatest choice.

To achieve the beautiful matt black finish, a number of methods are employed, with the majority of producers using either an electroplating process or something called PVD.

Other ranges offer equally durable painted finishes, and certain methods may be combined to get that dark, elegant look. You can read about How to clean your mixer tapware effectively by visiting http://roofingwaltham.com/how-to-clean-your-mixer-tapware-effectively/

Electroplating

Electroplating is a very scientific method of coating the surface of your tapware and brassware with black.

The technique includes manipulating a water-based paint solution at the atomic level with an electric current, transforming it into a very thin layer of black coating.

This results in a robust surface that will withstand daily wear and tear, but you must still use caution while cleaning.

PVD.

PVD is similar to utilizing one of those vacuum forming machines they used to use in school, in that it requires applying a thin coating of metal to the surface using a vacuum.

Due to the fact that this vacuuming method is more successful than electroplating and results in a more durable matt black surface, it is gaining popularity.

A picture containing indoor, floor, tub, bathtub

Defending Against Black Tape Wear and Tear

While both treatments contribute to the overall quality of your new black tapware, any black finish may be harmed by strong disinfectants and chemical cleaners.

That is why it is essential that you take the time to understand how to properly care for your black tapware – regardless of how they are finished – in order to extend their life and maintain the desired aesthetic.

What Is the Best Way to Clean Matt Black Taps?

After all that, you may be concerned about causing damage if you clean black tapware incorrectly, but honestly, cleaning black taps and brassware is very easy; it just requires a little more care and thought.

Before you begin, there are a few points to keep in mind.

When cleaning black bathroom faucets, avoid the following.

  • Scrubbers, scouring pads, or anything abrasive or scratchy
  • Cleaners containing chemicals 
  • Bleach 
  • Polish or wax 
  • Anything acidic, such as a DIY lemon spray

Bear in mind that this black tapware is your pride and pleasure!

They are delicate and fashionable – they are not made of stainless steel!

Disinfecting Black Taps

To clean black tapware, just use warm water and a soft microfiber cloth.

Nor a penny more, not a penny less.

Clean the tap from top to bottom with a little scrubbing, carefully and without using excessive elbow grease.

There you have it, spotless black faucets.

Is It Possible to Scratch Black Taps?

The simple answer is yes.

However, just like with your vehicle in the driveway, you are not permitted to run sharp things down the side and over the top of your new designer tapware to check whether they scratch!

Of course, you wouldn’t do that, but rings may be tricky with matt black taps, and it’s something we’re all guilty of forgetting about sometimes.

If you do not want to completely remove your rings while using black taps, just be more mindful of them and avoid damaging the surface of the tap.

How Are O-Ring Stains Defined?

After a period of time with your new black tap installed, it’s normal to notice they’ve developed a little stain from the grease applied to the O-ring.

This grease accumulates between the tap’s base and the top of the basin or tapware.

You may attempt to remove this with only a little warm soapy water, but if you struggle and discover that it will not come off, it is okay to use an alcohol cleaning to remove the oil from the tap’s base.

However, use great caution.

If you are uncertain or concerned that cleaning may be too powerful for your faucets, you may contact the makers directly or contact us.

Exercise Caution When Installing

The majority of damage to brassware and tapware happens during the construction and restoration phases – essentially when they are installed.

Check your new black taps immediately upon receipt – they should be immaculate, with no flaws in the polish.

Ensure that you or the tradesperson you’ve hired to install the tap use extreme caution while handling and installing it; after all, they are high-end tapware features that you want to maintain looking their best!

Is Hard Water A Factor When It Comes To Black Taps?

This is possible due to the fact that hard water generates more limescale.

Limescale is a chalky white substance that will undoubtedly stick out on any black brassware, therefore in order to maintain the finish for an extended period of time, you must stay on top of it.

Simply cleaning on a regular basis may keep limescale at bay, so don’t be sluggish!

Take Extra Care When Applying Makeup

If you apply makeup in the bathroom, it’s almost certain that some will end up on your black tapware.

When wiped away, these dusty particles may make black taps seem hazy, so it’s a good idea to have a microfiber cloth handy to remove any irritating powder.

Categories: Black Tapware Tapware

Alexander Westgarth